Page 182 - TesaKatalogen

S trai g h tness , A n g le an d I nclination M easurement

DIN 2276 Part 2 TESA MICROBEVEL 1 Inclinometer
(Style D)
See table for max. TESA MICROBEVEL 1 is particularly suited for measuring slightly inclined sur-
perm. errors faces such as the measuring of flatness of surfaces or the geometrical characte-
LCD display ristics (deviation, rotation etc.) of a machine tool.
according to table Suited for operation under the most rugged conditions., protected by an alumi-
Fully encapsulated nium case.
measuring system Power supplied by a single standard battery AA 1,5 V for at least 100 hours of
with gravity operation.
pendulum
See table for max. Horizontal model Square model
perm. errors Models with steps 0,05 to 0,005 mm/m available on request
2 flat measuring
faces with V-slot Range 1 or Base width, Base height, kg
for diameters from Range 2, mm/m mm mm (with transport
20 to 120 mm
Cast iron base.
Chromium plated
side faces.
Aluminium housing,
lacquered

Response time < 3 s

Automatic shut
down after 55 min
1 mV per unit
(100 kΩ)
1,5 V battery, type
LRC 6, AA

100 to 140 hours
≤ 0,1 %/°C based
on the measuring
range at 20 ± 5°C
EN 50081-1 / -2 EN
50082-1 / -2

case)

05330003 TESA MICROBEVEL 1 0,01 ou 0,001 110 45 1,8
05330004 horizontal base 110
05330005 x 45 mm

TESA MICROBEVEL 1 0,01 ou 0,001 150 45 2,1
horizontal base 150
x 45 mm

TESA MICROBEVEL 0,01 ou 0,001 150 45 3,1
1 square base 150 x
45 mm

Optional accessorY:
04768002 4 batteries LRC 6 AA, 1,5 V for CLINOBEVEL 1 USB, CLINOBEVEL 2, MICROBEVEL,

Range mm/m mm/m mm G = mm/m
1 ± 20 ±5 0,01
Flatness ≤ 5 mm/m Flatness > 5 mm/m
2 ± 2 ± 2 0,001 G = 1 % of the measured value G = 0,01 mm/m
and min. 0,01 mm/m Flatness > 1 mm/m
Flatness ≤ 1 mm/m G = 1 % of (2x measured value
G = 1 % of the measured value -1)
and min. 0,001 mm/m

J-5