Page 228 - TesaKatalogen

Roughness S urfa c e R oug h ness T esting
parameters accor-
ding to: ISO 4287, TESA PROFILE SET 2 mm
ISO 13565-1, ISO
13565-2, ISO 12085, PROFILE SET 2 mm for profile measurement (compatible with RUGOSURF 90G).
VDA 2007 When equipped with the SB2000 probe and used with the PROFILE STUDIO sof-
Z = 2 mm tware dedicated for profile measurement STUDIO PROFILE, the RUGOSURF 90G
X = 50 mm roughness gauge converts into a profile-measuring tool.
Z = 0,1 μm A simple, ingenious and accurate solution, this optional accessory measures
X= 0,4 to 4,0 μm lengths, radiii and angles of parts which are sometimes impossible to verify by
according to the len- other means.
gth being measured The setting up and the evaluation of measurements is simple and fast. Dimen-
Z = 3,5 + 0,75*H sions can be inserted into the measured profile after defining geometric elements
microns, (H in the Z (point, line, arc or intersection between two lines, for example). The tolerance
axis, in mm) X = 3,5 values a​ llow verification of the results at a glance. Rotation and symetry of the
+ L /10 microns (L in profile also allows its orientation.
the X axis, in mm) A previous measurement can be used as model for the repeated measurement of
0,3 mg (0,003 mN) a part of identical geometry. This saves valuable time and facilitates operations
with the SB2000 as important manual measurements can be replicated automatically.
probe A standard profile with a measurement report is included in the PROFILE SET
2 mm set.
1 mm/s A detailed measurement report with customizable header can be generated from
the PROFILE STUDIO software.
Maximum angle
of 70° (upward
position); maximum
angle of 85°
(downward position)

PROFILE STUDIO software 5
SB2000 probe 1

Ø 11

30 60

06960100 PROFILE SET 2 mm
for profile measurement with RUGUSURF 90G

Delivered with the following accessories:

06960101 PROFILE STUDIO Software

06960102 SB2000 probe for PROFILE SET 2 mm,
R= 15 µm, 20°

06960103 Setting master for PROFILE SET 2 mm

06960062 Cable RUGOSURF 10G and RUGOSURF 90G to PC (connector v3)

M-13