Page 86 - TesaKatalogen

I n t e r n a l Me a s u r e m e n t

DIN 863 T4. TESA ALESOMETER Capa μ System with Digital Display
Style C1 for models
6 to 10 mm or style Fitted with a TESA patented capacitive measuring system. Bore gauges with
C2 for all other 3-line contact. All TESA ALESOMETER are made to measure through and blind
models. bores as well as short centring shoulders, except for the models covering the
0,001 mm / application range from 6 to 10 mm.
0.00005 in

LCD, digit height
7 mm

Floating zero

Metric/inch B
conversion
Measuring inserts
for application range
6 to 10 mm: steel,
hardened to
550 HV 30. 10 to 300:
tungsten carbide
tipped, HRC ≥ 70.

3 V lithium battery

1 to 2 a A
(≈ 2000 h/a) C
Automatic shut
down after 10 min. mm in μm μm A mm B mm C mm
Display setting is
retained as long as 06230051 6 ÷ 8 0.2362 ÷ 0.3150 4 4 1,2 3 55
power supply
remains stable. 06230052 8 ÷ 10 0.3150 ÷ 0.3970 4 4 1,2 3 55
For the measuring
element IP54 06230023 10 ÷ 12,5 0.3970 ÷ 0.4921 4 4 0,3 6,5 65
(IEC 60529) or
IP40 with active 06230024 12,5 ÷ 15 0.4921 ÷ 0.5905 4 4 0,3 6,5 65
data output
Inspection report
with a declaration
of conformity

Display lock

RS232
opto-coupled,
bidirectional

06230025 15 ÷ 17,5 0.5905 ÷ 0.6890 4 4 0,3 6,8 65

06230026 17,5 ÷ 20 0.6890 ÷ 0.7874 4 4 0,3 6,8 95

06230027 20 ÷ 25 0.7874 ÷ 0.9843 4 4 0,3 8,5 100

06230028 25 ÷ 30 0.9843 ÷ 1.1811 4 4 0,3 8,5 100

06230029 30 ÷ 35 1.1811 ÷ 1.3780 4 4 0,3 8,5 100

06230030 35 ÷ 40 1.3780 ÷ 1.5748 4 4 0,3 8,5 100

06230031 40 ÷ 50 1.5748 ÷ 1.9685 4 4 0,3 14,5 140

06230032 50 ÷ 60 1.9685 ÷ 2.3622 5 5 0,3 14,5 140

06230033 60 ÷ 70 2.3622 ÷ 2.7560 5 5 0,3 14,5 140

06230034 70 ÷ 85 2.7560 ÷ 3.3465 5 5 0,3 14,5 140

06230035 85 ÷ 100 3.3465 ÷ 3.9370 5 5 0,3 14,5 140

06230036 100 ÷ 125 3.9370 ÷ 4.9212 6 6 0,3 30 175

06230037 125 ÷ 150 4.9212 ÷ 5.9055 6 6 0,3 30 175

06230038 150 ÷ 175 5.9055 ÷ 6.8897 7 7 0,3 30 175

06230039 175 ÷ 200 6.8897 ÷ 7.8740 7 7 0,3 30 175

Optional Accessory
01961000 1 Lithium battery 3V, CR2032

Face A: Not applicable for models larger than 10 mm onwards, as the measuring inserts are too close to the micrometer front face.

D-11