Page 210 - TesaKatalogen

EN ISO 3650 G a u ge B l oc k C o m pa r ato r s

Special high-alloy Additional Gauge Block Set for Calibration of the TESA
steel wear resistant UPD System
and stable
For calibration In order to achieve the lowest uncertainty of measurement, we recommend the
certificates, see use of grade K gauge blocks which have been measured directly by interferometry
opposite and are supplied with a calibration certificate, irrespective of any other require-
Expanded uncer- ment such as the ambient conditions.
tainty k = 2 is valid
for that given

S59300103 Set 9 gauge blocks with METAS certificate ± 0,02 + 0,2 · L μm
S59300107 (Swiss) (L in m )
S59300104 Set 9 gauge blocks with PTB certificate ± 0,02 + 0,2 · L μm
(Germany) (L in m)
Set 9 gauge blocks with SCS certificate ± 0,05 + 0,5 · L μm
(L in m )

Set composition (mm)
1 / 5 / 10 / 15 / 20 / 25 / 50 / 75 / 100
Steel

Accuracy grade K

Other set composition or carbide gauge blocks also available on request.

TESA UPT

Fully calibrated for the measuring ranges from 19°C up to 24°C with a numerical
interval to 0,001°C.
Supplied with a calibration certificate issued by the Swiss Calibration Service
(SCS). Uncertainty of measurement achieved during calibration U = ± 0,03°C.

05930011 Temperature measurement device
Consisting of:
05960018 Set of 4 temperature sensors PT 100
05960038 Meausring unit for temperature, FLUKE 1529
05960012 Interface Box 4 x PT 100
05960011 Connecting cable for adapter No. 05960012 to measuring unit No. 05960038
05960026 Connecting cable from UPC to computer (9-pin/m and 9-pin/f connector)

L-9