Page 308 - TesaKatalogen

U S B , D C , W i r eless P r obes

DIN 32876 DC Miniature Probes ± 1 mm (Output Signal in V)
Part 1
Probe provided with an electronic box which converts the signal to obtain an
See standard probes output DC voltage
technical data
Cable length: 2 m. Typically used for direct connection to a computer unit or an interface equipped
DIN 45322 plug with an analogue input
connector, 5 poles.
Use to connect to a 1 +15V
device with an ana- 2
log input. For more 3 –15V
information, refer to
technical data for M4
standard probes
Drive voltage: ± 15 V 5 Signal
Consumption: 15 mA
Adjustment load: Connection of a DC probe to a computer, an interface or DIN 5 pin connection schematic
> 1 kΩ. Can be used a plotter
in any position.
Special versions on Measuring Nominal mea- Bolt retraction Sealing Output Sensitivity,
request. Sensivity: range, mm suring force*, N bellows voltage, V V/mm
2 V/mm, 5 V/mm, 10 ±1 1
V/mm Output: 0 V à 03230085 GT 44 DC ± 1 0,4 Mechanical / vacuum Viton
+10 V (max +10 V)
See standard probes
technical data

See standard probes
technical data

See standard probes
technical data

See standard probes
technical data

See standard probes
technical data

GT 44 DC Measuring bolt travel, Max. permissible Repeatability, μm Data sheet No.
mm error for deviations in 0,1 03200518

linearity, μm
(L en mm)
2,1 0,2 + 5· L3

* Electrical zero (N) ± 25 % deviation limit. Valid in vertical mounting position, measuring bolt lowered and in static measuring.

O-35