Page 312 - TesaKatalogen

DIN 32876 P r obes with a x ial moveme n t , Ø 8 mm
Part 1
Nickel-plated hou- Probes, Unbranded Execution, Series 410 ± 1 mm, 2,5 mm
sing. Stainless steel Range, Short Body
measuring bolt,
hardened. Sealing Universal probes for common but constraining applications.
bellows: Nitrile = –– 8 mm diameter probe body that can be clamped over its entire length.
resistant elastomer –– Ball bearing measuring bolt.
Fixing shank –– Hardened steel body, hard-chrome plated.
Ø 8 mm. Ball-bea- –– Degree of protection to IP62.
ring measuring bolt. –– Flexible axial cable exit fitted with a steel spring to prevent the cable from
Distance from elec-
trical zero of both breaking.
stops is either ad- –– Other probes compatible with measuring equipment from other makers also
justable (downward)
or depending on available on request.
the position of the
lower stop (upward). 54.78 32.48 17.41
Interchangeable 41.37
measuring insert
with a 3 mm dia. ø7.98
tungsten carbide ø8.00
ball tip plus M2,5
thread. 2 m long 410 410 and accessory with radial cable exit (delivered with
cable. DIN 45322 probe)
5-pin connector.
Supply frequency: Measuring Nominal mea- Bolt retraction Sealing
13 kHz (± 5 %) Max. range, mm suring force*, N bellows
mechanical fre- Nitrile
quency**: 60 Hz.
0,025 μm/°C

20 ± 0,5°C

IP65 (IEC 60529)

Mobile weight: 3,1 g

96410012 410 ± 1 0,60 Mechanical

Measuring bolt Max. permissible Repeatabilty, Setting of lower stop Cable output Data sheet No.
travel, mm error for deviations μm of the measuring
bolt***, mm
in linearity, μm (factory setting)
(L en mm)

410 2,5 0,2 % (for a mea- 0,1 Adjustable from -1,2 Axial and radial F96410012
suring span of to 0 (factory setting
± 1 mm) -1,08)

* Electrical zero (N) ± 25 % deviation limit. Valid in vertical mounting position, measuring bolt lowered and in static measuring.
** For an amplitude of 10 % to the last value of the measuring range.
*** Distance from electrical zero.

O-39