Page 299 - TesaKatalogen

U S B , D C , W i r eless P r obes DIN 32876
Part 1
Wireless Probe ± 2 mm Nickel-plated
housing
Probes developed for devices requiring a greater freedom of movement during the Stainless steel
measurement or for parts with large dimensions. measuring bolt,
Bidirectional and wireless communication synchronized with the TWIN-STATION hardened
Receiver. Viton sealing
–– Resolution 0,1 μm. bellows = highly
–– Range of 8 m, depending on environment. resistant fluoroe-
–– TESA wireless communication protocol independent of WiFi or Bluetooth. lastomer
–– Autonomy 40 hours (rechargeable battery). Fixing body nickel
–– Mounting stem Ø 8 mm with clamping possible over entire length. Ø 8 mm
–– Measuring bolt mounted on ball bearing. Stainless steel
–– Ball bearing guide separated from mounting stem in order not to negatively measuring bolt,
hardened and ball
influence the movement of the measuring bolt in the event of improper bearing guided
clamping of the probe body. Fixed upper and
–– Level of protection IP54 according to IEC 60529. lower stops
–– Wide range of measurement inserts. Interchangeable
–– The TWIN-STATION (part number 05030012) manages and synchronizes up to inserts
8 wireless probes. M2, 5 thread
–– Interface Software TIS included in delivery content of the TWIN-STATION Carbide ball Ø 3 mm
(part number 05030012): display of measured values, possibility to indicate Mini jack connector
tolerances, simple functions +A, -A, +A+B, +A-B, and export of values ​as a .csv for charger.
file. Mechanical max.
Note: The sales is limited to EU countries, Switzerland, USA, Canada and China. frequency**: 60 Hz
Power supply:
180.1 100 ÷ 240 VAC,
50 ÷ 60 Hz; 240 mAh
R 1,5 ø 8h6 Rechargeable
battery: 3,7 V, min.
20.4 63.6 52.8 550 mAh or 800 mAh
Frequency band:
-2.1 +2.1 2,4 GHz Range:
0 8 m, depending on
environment.
10 Wireless transmis-
sion, TWIN-STATION
GTL 21 W GTL 21 W Receiver (05030012)
± 0,2 μm/°C

20 ± 0,5°C

Protection level
IP54 (IEC 60529)

GTL 21 W: 6g
Inspection report
with a declaration of
conformity

03230500 GTL 21 W Measuring Nominal mea- Bolt Sealing
range, mm suring force*, N retraction bellows
±2 0,63 Mechanical Viton

Optional accessory:

05030012 TWIN-STATION Interface for wireless probes

Max. plunger Maximum Repeatability, Hysteresis, Setting of lower Cable output Data sheet
travel, mm permissible μm μm stop of No.
0,10 0,5 the measuring
error, μm bolt***, mm
(L in mm)
GTL 21 W 4,3 0,4 + 0,8· L Fixed stops: lower Without 03200602
-2,1 upper +2,1 cable

* Electrical zero (N) ± 25 % deviation limit. Valid in vertical mounting position, measuring bolt lowered and in static measuring.
** For an amplitude of 10 % to the last value of the measuring range.
*** Distance from electrical zero.

O-26