Page 301 - TesaKatalogen

U S B , D C , W i r eless P r obes DIN 32876
Part 1
Wireless Pneumatic Probe ± 1,5 mm Nickel-plated
housing
Probes developed for devices requiring a greater freedom of movement during the Stainless steel
measurement or for parts with large dimensions. measuring bolt,
Bidirectional and wireless communication synchronized with the TWIN-STATION hardened
Receiver. Viton sealing
–– Resolution 0,1 μm. bellows = highly
–– Range of 8 m, depending on environment. resistance fluoroe-
–– TESA wireless communication protocol independent from WiFi or Bluetooth lastomer
–– Autonomy 40 hours (rechargeable battery). Fixing body nickel
–– Support structure Ø 8 mm with enhanced clamping over its entire length Ø 8 mm
–– Measuring rod mounted on ball bearing. Stainless steel
–– Separate guide bearing on the holding body in order not to negatively influence measuring bolt,
hardened and ball
the movement of the measuring rod in the event of improper clamping of the bearing guided
probe beads. Fixed upper and
–– Level of protection IP54 according to IEC 60529. lower stops
–– Wide range of measurement probes. Probe interchan-
–– The TWIN-STATION (part number 05030012) manages and synchronizes up geable
to 8 wireless probes. M2,5 thread
–– Interface Software TIS included in delivery content of the TWIN-STATION Carbide ball Ø 3 mm
(art. 05030012): display of measured values, possibility to indicate tolerances, Mini jack connector
simple functions +A, -A, +A+B, +A-B, and export of values ​in a .csv file. for charger.
Note: The sales is limited to EU countries, Switzerland, USA, Canada and China. Mechanical max.
frequency**: 60 Hz
180.1 Power supply:
100 ÷ 240 VAC,
R 1,5 ø 8h6 50 ÷ 60 Hz; 240 mAh
Rechargeable
20.4 63.6 52.8 battery: 3,7 V, min.
550 mAh or 800 mAh
-2.1 +2.1 Frequency band:
0 2,4 GHz Range:
8 m, depending on
10 environment.
Wireless transmis-
GTL 212 W GTL 212 W sion, TWIN-STATION
Receiver (05030012)
Measuring Nominal mea- Bolt retraction Sealing Nominal/maximal ± 0,2 μm/°C
range, mm suring force*, N bellows pressure, bar
± 1,5 1,2 0,7 / max. 1,0 20 ± 0,5°C

Protection IP54
(IEC 60529)

GTL 212 W: 6g
Inspection report
with a declaration of
conformity

03230501 GTL 212 Pressure Viton
(bolt activation), spring
(bolt retraction)

Optional accessory:

05030012 TWIN-STATION Interface for wireless probes

GTL 212 W Max. meau- Maximum Repeatability, Hysteresis, Setting of lower Cable Data sheet
ring bolt permissible μm μm stop of output No.
travel, mm error, μm 0,10 0,5 the measuring Without 03200620
4,3 (L in mm) bolt***, mm cable
0,4 + 0,8· L Fixed stops: lower
-2,1 upper +2,1

* Electrical zero (N) ± 25 % deviation limit. Valid in vertical mounting position, measuring bolt lowered and in static measuring.
** For an amplitude of 10 % to the last value of the measuring range.
*** Distance from electrical zero.

O-28